'

Search results

Found 794 matches
Diatomic ideal gas heat capacity at constant volume

Heat capacity or thermal capacity is a physical quantity equal to the ratio of the heat that is added to (or removed from) an object to the resulting ... more

Roller screw (ratio of roller thread pitch to screw lead)

A roller screw, also known as a planetary roller screw or satellite roller screw, is a low-friction precision screw-type actuator, a mechanical device for ... more

Allowable Strength Design Load combination (eq8)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Allowable Strength Design Load combination (eq1)

In structural engineering, a structure is a body or combination of pieces of rigid bodies in space to form a fitness system for supporting loads. ... more

Tritration ( concentration of the analyte)

Titration, also known as titrimetry or volumetric analysis, is a common laboratory method of quantitative chemical analysis that is used to determine the ... more

Mach Number (subsonic, calculated from Pitot Tube Pressure)

In fluid mechanics, Mach number (M or Ma) is a dimensionless quantity representing the ratio of speed of an object moving through a fluid and the local ... more

Roller screw (effective nut inside diameter)

A roller screw, also known as a planetary roller screw or satellite roller screw, is a low-friction precision screw-type actuator, a mechanical device for ... more

Roller screw ( effective roller diameter)

A roller screw, also known as a planetary roller screw or satellite roller screw, is a low-friction precision screw-type actuator, a mechanical device for ... more

Properties of concrete - modulus of elasticity

Concrete has relatively high compressive strength, but significantly lower tensile strength. As a result, without compensating, concrete would almost ... more

Voltage gain

In electronics, gain is a measure of the ability of a two-port circuit (often an amplifier) to increase the power or amplitude of a signal from the input ... more

...can't find what you're looking for?

Create a new formula