# Search results

RESTRICTIONS : σ₁₂ = σ₁₃ = σ₂₃ = 0

The von Mises yield criterion suggests that the yielding of materials begins when the ... more

RESTRICTIONS : σ₃ = 0, σ₃₁ = σ₂₃ = 0

The von Mises yield criterion suggests that the yielding of materials begins when ... more

RESTRICTIONS : σ₃ = 0, σ₁₂ = σ₁₃ = σ₂₃ = 0

The von Mises yield criterion suggests that the yielding of materials begins ... more

RESTRICTIONS : σ₁ = σ₂ = σ₃ = 0, σ₃₁ = σ₂₃ = 0

The von Mises yield criterion suggests that the yielding of materials ... more

The normal and shear components of the stress tensor on octahedral planes are called octahedral normal stress and octahedral shear stress respectively. ... more

Hooke’s law states that the force needed to extend or compress a spring by some distance is proportional to that distance.The stresses and strains ... more

The von Mises yield criterion suggests that the yielding of materials begins when the second deviatoric stress invariant reaches a critical value. The von ... more

Energy density is the amount of energy stored in a given system or region of space per unit volume or mass, though the latter is more accurately termed ... more

A strain is a normalized measure of deformation representing the displacement between particles in the body relative to a reference length.The concept of ... more

Deformation in continuum mechanics is the transformation of a body from a reference configuration to a current configuration.

Strain is a normalized
... more

Energy density is the amount of energy stored in a given system or region of space per unit volume or mass, though the latter is more accurately termed ... more

Photoelasticity is an experimental method to determine the stress distribution in a material.Unlike the analytical methods of stress determination, ... more

The Euler’s pump and turbine equations are most fundamental equations in the field of turbo-machinery. These equations govern the power, efficiencies and ... more

Shear stress, is defined as the component of stress coplanar with a material cross section. Shear stress arises from the force vector component parallel to ... more

In materials science, creep (sometimes called cold flow) is the tendency of a solid material to move slowly or deform permanently under the influence of ... more

For a channel that is at an angle **a** from horizontal, the shear component of the stress acting on the bed , which is the component acting
... more

Factor of safety (FoS) or (FS), is a term describing the structural capacity of a system beyond the expected loads or actual loads. Essentially, how much ... more

In materials science, fatigue is the weakening of a material caused by repeatedly applied loads. Fatigue strength is a measure of the strength of a ... more

Shear stress,is defined as the component of stress coplanar with a material cross section. The average shear stress is force per unit area. Beam shear is ... more

he ASME Boiler and Pressure Vessel Code (BPVC) is an American Society of Mechanical Engineers (... more

The ASME Boiler and Pressure Vessel Code (BPVC) is an American Society of Mechanical Engineers (... more

Bolted joints are one of the most common elements in construction and machine design. They consist of fasteners that capture and join other parts, and are ... more

The Herschel–Bulkley fluid is a generalized model of a non-Newtonian fluid, in which the strain experienced by the fluid is related to the stress in a ... more

A threaded rod, also known as a stud, is a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the ... more

Fracture mechanics is the field of mechanics concerned with the study of the propagation of cracks in materials. It uses methods of analytical solid ... more

Mohr–Coulomb theory is a mathematical model describing the response of brittle materials such as concrete, or rubble piles, to shear stress as well as ... more

Bolted joints are one of the most common elements in construction and machine design. They consist of fasteners that capture and join other parts, and are ... more

The Shields parameter, also called the Shields criterion or Shields number, is a nondimensional number used to calculate the initiation of motion of ... more

In fluid dynamics, the law of the wall states that the average velocity of a turbulent flow at a certain point is proportional to the logarithm of the ... more

...can't find what you're looking for?

Create a new formula