'

# Search results

Found 1360 matches
Pressure in a Contact Area between two spheres

Contact mechanics is the study of the deformation of solids that touch each other at one or more points. Hertzian contact stress refers to the localized ... more

Critical Speed of a Rotating Shaft - Dunkerley's method

In solid mechanics, in the field of rotordynamics, the critical speed is the theoretical angular velocity that excites the natural frequency of a rotating ... more

Water hammer (wave speed)

Water hammer (or, more generally, fluid hammer) is a pressure surge or wave caused when a fluid (usually a liquid but sometimes also a gas) in motion is ... more

Maszara model DCB test (The compliance of a symmetric DCB speciment)

Wafer bonds are commonly characterized by three important encapsulation parameters: bond strength, hermeticity of encapsulation and bonding induced stress. ... more

Maugis-Dugdale model of elastic contact between two spheres (depth of penetration)

Contact mechanics is the study of the deformation of solids that touch each other at one or more points. Hertzian contact stress refers to the localized ... more

Pressure distribution on a Contact Area between a rigid cylinder and an elastic half-space

Contact mechanics is the study of the deformation of solids that touch each other at one or more points. Hertzian contact stress refers to the localized ... more

Slenderness ratio

Column or pillar in architecture and structural engineering is a structural element that transmits, through compression, the weight of the structure above ... more

Force exerted by stretched or contracted material

In continuum mechanics, stress is a physical quantity that expresses the internal forces that neighbouring particles of a continuous material exert on each ... more

Modulus of resilience

Resilience is the ability of a material to absorb energy when it is deformed elastically, and release that energy upon unloading. Proof resilience is ... more

Semi-Elliptic Laminated Leaf Spring (Stiffness)

Leaf spring, commonly used for the suspension in wheeled vehicles. The term is also used to refer to a bundled set of leaf springs. As the spring flexes, ... more

...can't find what you're looking for?

Create a new formula

### Search criteria:

Similar to formula
Category